Safe operation and precautions of metal circular saw machine

Release time:

2022-09-14 09:39

Source:

The metal circular saw machine has low noise, high efficiency, strong operability and high safety when working. Therefore, it is deeply recognized and favored by users. Do you know how to use the metal circular saw machine correctly to extend its service life?

The metal circular saw machine has low noise, high efficiency, strong operability and high safety when working. Therefore, it is deeply recognized and favored by users. Do you know how to use the metal circular saw machine correctly to extend its service life?

The safety of the metal circular saw machine is very important. The equipment must be checked when it is running, and the power must be cut off to prevent electric shock accidents. The residual pressure of the metal circular saw machine must be discharged, otherwise it is easy to fly out and pop out. After pressing the spindle stop button, the moment of inertia is very short, and the saw blade can only be replaced until it stops completely. Next, there is another key point, which is the operation method of the metal circular saw machine. Everyone also needs to understand that you cannot touch the saw blade with your hands when operating the machine, otherwise the saw blade will collapse, and in serious cases, it will cut your fingers or other accidents; after the metal circular saw machine stops completely, the saw blade cover must be opened. When the material is placed on the material table, a crane should be used for operation. It cannot be operated directly by hand, and a crane license is required to operate it. Wet hands cannot touch equipment, electrical appliances, sensors, buttons, etc. to prevent electric shock accidents.

The installation line of the metal circular saw machine is also very important. In fact, the line installation must be grounded, and high-strength insulation shielding must be used. Then there are the equipment to protect the parts. The protective devices of the machine must be in place. The blade cover and cover must be closed and the screws must be tightened. Do not open when the machine is running. In the event of a lightning strike, the voltage is abnormal, please stop the machine in time and cut off the power supply. That is to say, if the operator accidentally inhales the oil mist, it will be spit out and washed clean, and the operator must be familiar with the operating instructions. When the equipment is not working, do a good job of hygiene, keep the circular saw clean, extend its service life and improve safety. And it is also necessary to pay attention to the fact that if you find that the electric door of the metal circular saw machine is not opened when it is unnecessary. The cutting oil mist should not be too much, and too much will affect the environment. If you have a cold, physical discomfort, etc., do not operate the metal circular saw machine, and be sure to check or adjust it during operation.

Previous article

Inventory of the basic features of metal circular saw machines

None

Next

Related News

What is the reason why the metal circular saw machine is not sharp and how to solve it?

The impact of the circular saw blade of the metal circular saw machine is not very large, such as cutting too large workpieces, the surface of the workpiece is not smooth, and the production efficiency is reduced. How to prevent the metal circular saw blade from being too blunt? Let's take a look at the factors and solutions for the sharpness of the metal circular saw machine blade!

High-speed metal circular saw machine saw blade maintenance precautions

Maintaining good working habits and formulating a strict maintenance system will help the smooth operation of the equipment. Metal circular saw machines, especially saw blades, must be carefully cleaned before or after work.

How to operate a metal circular saw

The metal circular saw machine is hydraulic, with vertical slides moving up and down, a firm feeding structure, accurate movements, and a floating material seat that does not damage the surface of the workpiece. Next, I will introduce the operation method of the metal circular saw machine.

Operating rules and characteristics of metal circular saw machines

The metal circular saw machine is hydraulic, with vertical guide rails for up and down advance and retreat, a firm feeding structure, accurate movement, and the floating seat does not damage the surface of the workpiece. The following is an introduction to the operation process and characteristics.

Practical Uses of Metal Circular Saw Machines

Metal circular saw machine is a form of circular saw. What are the practical uses? Here is a brief introduction to this question. Practical application of metal circular saw machine:

Advantages of using a metal circular saw machine

Metal circular saw machine is an industry that has emerged in recent years and belongs to metal cutting machinery and equipment. Many companies choose band saws or traditional old-fashioned equipment when processing metal materials, so companies must choose and replace new equipment now.