Operating rules and characteristics of metal circular saw machines

The metal circular saw machine is hydraulic, with vertical guide rails for up and down advance and retreat, a firm feeding structure, accurate movement, and the floating seat does not damage the surface of the workpiece. The following is an introduction to the operation process and characteristics.

Metal circular saw machine operation procedures:

1. Operators can only operate after passing the assessment and obtaining the operation certificate. Operators should be familiar with the performance and structure of the machine and must abide by the safety and shift system.

2. Strictly fill according to the lubrication chart before work, keep the oil volume appropriate, and the oil circuit unblocked.

3. Idle for about 10 minutes, check the transmission parts, lubrication, hydraulic and cooling systems, check whether the vise is normal, and start working when the lubricating oil temperature is greater than 20℃.

4. The sawing material should be placed steadily. According to different cross-sectional shapes, use the edge of the material or the whole piece, or place it directly, and clamp it. When multiple pieces are clamped, check whether they are all clamped.

5. If the sawed material is bent, it should not be clamped in multiple pieces.

6. Pay attention to whether there are people around when loading and unloading (transporting) long materials. Long materials should be installed on the bracket. If more than two people operate, one person should be in charge and cooperate with each other.

7. Choose the appropriate cutting speed according to the type and hardness of the material being cut.

8. The saw blade should be covered with a safety cover, and the human body should not be close to the running saw blade.

9. The operator must not leave during the operation. Turn off the power switch when the power is off.

10. After get off work, the equipment must be inspected and cleaned, and daily maintenance work must be done. Each handle (switches) must be placed in neutral (zero position), and the power switch must be turned off to ensure neatness, cleanliness, lubrication, and safety.

11. Fill in relevant records carefully.

Features of metal circular saw machine:

1. Specially designed clamps with strong clamping force.

2. Automatic oiling and lubrication of the slideway and automatic feeding make the operation safer.

3. Fast, convenient, efficient, saving labor and processing time, etc.

4. The machine accessories use imported components to ensure the service life of the machine.

5. The whole machine is energy-saving and has a long service life. The machine body is beautiful and wrinkle-free, and non-technical personnel can operate it easily.

6. The new optimized overall design is small in size, strong in versatility, and the machine body is stable and not deformed.

7. The structure is reasonable, sturdy and reliable, and the operation is stable.

8. The accessories have been strictly inspected, with high quality and uniform specifications.

9. The oil tank adopts a new generation of carbon dioxide welding to ensure that the oil tank has no residual impurities, no oil leakage, no welding slag and other undesirable phenomena.

10. The coolant circulates automatically to ensure a smooth sawing surface and a long service life of the saw blade.

11. The metal circular saw machine has the following features: fast, high precision, easy maintenance, light operation, low noise, no dust pollution, stable quality, and good quality and effect of sawing various pipe fittings.